Question:
I see in the pictures that there is a "Master Volume". I know that the line out comes before the Master Volume so I am not worried about that. I am wondering if the master volume is really a master volume or if it is just cutting the power tube power. Anyone know?
Answer:
See here: http://www.yorkville.com/downloads/manuals/omycv20.pdf
The master volume controls the power amp which is driven by the power tubes, as opposed to the preamp controls which are not. In answer to your question, your power tubes will be working harder as you turn it up. Most tube amps work this way.
Answer:
Ok. I now see there is not a master volume so forget the question I just asked.
I got the amp today. One more question. This is my first tube amp so I am not that familier with them. Where are the tubes and how do I get to them to replace them? I can see the three power tubes(I think) inside the amp but I do not see the pre-amp tubes. Are those usually hidden? Am I right saying the pre-amp tubes should last longer than the power tubes?
Answer:
on most tube amps, you can see the tubes from the back of the amp...the pre-amp tubes are not always as easily seen as the power tubes because they're alot smaller. pre-amp tubes usually last longer than power tubes.
Answer:
That is the problem. I only see 3 in the back. Ther should be five.
Is it normal for the reverb to sound tinny? I don't really like it above 3.
Answer:
Originally Posted by surferdude9375 That is the problem. I only see 3 in the back. Ther should be five.
Is it normal for the reverb to sound tinny? I don't really like it above 3.
It's probably hidden like mine are in my Traynor. Take off the back panel and you may also have to unscrew a plate behind that panel to see the preamp tubes, which as you assumed usually last longer than the power tubes.
As for the reverb, don't judge any of it until you listen to it at levels outside of the bedroom, music room or garage. Tweak it in a live playing venue, otherwise, it's okay to keep the sensitivity down. I would have to say that the reverb on my Traynor is not as good as the one in my Fender Bandmaster.